prayerofdesign
Neu hier
Threadstarter
ich wollte es ausschalten...
mein Händler sagt geht nicht- hab nachgeforscht und es geht doch
Hier die Beschreibung wie:
Already posted as attachment but in case you did not noticed, here are the instructions:
NOTE: The following steps must occur within the first
60 seconds of the ignition switch being turned to the ON
or START position. DaimlerChrysler Corporation does
not recommend deactivating the Enhanced Warning System
(BeltAlert ).
1. Turn the ignition switch to the LOCK position and
buckle the driver or front passenger seat belt.
2. Turn the ignition switch to the ON position and wait
for the Seat Belt Warning Light to turn off.
3. Within 60 seconds of turning the ignition switch to the
ON position, unbuckle and then re-buckle the driver or
front passenger seat belt at least three times within 10
seconds, ending with the seat belt buckled.
NOTE: Watch for the Seat Belt Warning Light to turn on
while unbuckling and off while re-buckling the seat belt.
It may be necessary to retract the seat belt.
4. Turn the ignition switch to the LOCK position. A
single chime will sound to signify that you have successfully
completed the programming.
The Enhanced Warning System (BeltAlert ) can be reactivated
by repeating this procedure.
NOTE: Although the Enhanced Warning System
(BeltAlert ) has been deactivated, the Seat Belt Warning
Light will continue to illuminate while the driver or front
passenger seat belt remains unbuckled.
War übrigens ne harte Diskusion, hab mich als bekennender nicht Nutzer arg beschimfen lassen müssen!!!
Aber es hat sich gelohnt- nun ist ruhig ohne Gurt im Pat
mein Händler sagt geht nicht- hab nachgeforscht und es geht doch
Hier die Beschreibung wie:
Already posted as attachment but in case you did not noticed, here are the instructions:
NOTE: The following steps must occur within the first
60 seconds of the ignition switch being turned to the ON
or START position. DaimlerChrysler Corporation does
not recommend deactivating the Enhanced Warning System
(BeltAlert ).
1. Turn the ignition switch to the LOCK position and
buckle the driver or front passenger seat belt.
2. Turn the ignition switch to the ON position and wait
for the Seat Belt Warning Light to turn off.
3. Within 60 seconds of turning the ignition switch to the
ON position, unbuckle and then re-buckle the driver or
front passenger seat belt at least three times within 10
seconds, ending with the seat belt buckled.
NOTE: Watch for the Seat Belt Warning Light to turn on
while unbuckling and off while re-buckling the seat belt.
It may be necessary to retract the seat belt.
4. Turn the ignition switch to the LOCK position. A
single chime will sound to signify that you have successfully
completed the programming.
The Enhanced Warning System (BeltAlert ) can be reactivated
by repeating this procedure.
NOTE: Although the Enhanced Warning System
(BeltAlert ) has been deactivated, the Seat Belt Warning
Light will continue to illuminate while the driver or front
passenger seat belt remains unbuckled.
War übrigens ne harte Diskusion, hab mich als bekennender nicht Nutzer arg beschimfen lassen müssen!!!
Aber es hat sich gelohnt- nun ist ruhig ohne Gurt im Pat