Die Probleme gehen net aus:) Dachkonsole WJ

[OffroadWJ]

Hallo Leute, so jetzt ist mal der Motor raus damit ich den Simering am Getriebe und alles andere besser machen kann. So durch zufall ist mir was aufgefallen. Meine Dachkonsole ist auf Spanisch eingestellt?!?!! und wenn ich dann den Knopf drucke wo man das umstellen kann passiert absolut nix....ist die Defekt oder gibts da einen Trick wieso der Knop net funktioniert?!?

 

[cherokee xj]

Customize Your Vehicle Information Center

Information can be displayed in U.S. or Metric. Press the US/M button on the Overhead Console to select the desired mode.

Use the following steps to customize your Vehicle Information Center:

1. Press and hold the SET button while turning the ignition ON. The Center will display "Language" - (whatever language was set during the last "Set" cycle).

2. Press the SELECT button to display the next language selection. You have the choice of Enlish, French, German, Spanish, or Italian. Press the SET button to lock in your choice.

3. After step 2 has been completed the Center will change the screen to a 12 or 24-hour time cycle that you can choose between by pressing the SELECT button.

4. Pressing the SET button will lock your choice into the computer.

5. After step 4 has been completed the Center will display the sevice reminder mileage interval. If you choose to be reminded of service more often than 7,500 miles (3000km) you can change the mileage interval by pressing the SELECT button. It can be set to indicate mileage in 500 mile increments from 2,000 to 7,500 (or in 1000km increments from 3000km to 12000km).

6. When you have reached the desired number press the SET button to store your choice in the computer and to return the display to normal operation.

 

[OffroadWJ]

Danke dir fur die Antwort.....aber das hilft leider nix, da der SET Knopf absolut keine Funktion hat, daher hab ich gefragt ob jemand sowas schon hatte?
 
 

 
 
 
Customize Your Vehicle Information Center

Information can be displayed in U.S. or Metric. Press the US/M button on the Overhead Console to select the desired mode.

Use the following steps to customize your Vehicle Information Center:

1. Press and hold the SET button while turning the ignition ON. The Center will display "Language" - (whatever language was set during the last "Set" cycle).

2. Press the SELECT button to display the next language selection. You have the choice of Enlish, French, German, Spanish, or Italian. Press the SET button to lock in your choice.

3. After step 2 has been completed the Center will change the screen to a 12 or 24-hour time cycle that you can choose between by pressing the SELECT button.

4. Pressing the SET button will lock your choice into the computer.

5. After step 4 has been completed the Center will display the sevice reminder mileage interval. If you choose to be reminded of service more often than 7,500 miles (3000km) you can change the mileage interval by pressing the SELECT button. It can be set to indicate mileage in 500 mile increments from 2,000 to 7,500 (or in 1000km increments from 3000km to 12000km).

6. When you have reached the desired number press the SET button to store your choice in the computer and to return the display to normal operation.

 

 

[Buster3]

Hallo,
Ja wenn es wirklich so ist das der set knopf nicht mehr tut kannste am besten ne andere gebrauchte konsole einbauen, die gibt es für 50-80 Euro
 
grüsse jens